Arachne v1.93;GPL
Arachne for DOS
The self extracting .EXE has been zipped into a193gpl.zip.
(most of the add-on features are commented out
but can be easily re-enabled as you become more experienced)
Download this file and then unzip the contained SFX file itself.
(ZIP file contains.... a193gpl.exe)
Back again... a version for 8086 thru 80286 CPUs (without FPU)a193;GPL,286-.
v193;GPL is essentially Joe's v1.90;J1 with just few small 'tweaks'
Most notably.... dial-up connection info will now be written
into LSPPP.CFG for use with LSPPP.EXE as dialer/packet driver.
The setup 'wizard' and internal connection setup pages now give
the option of choosing MINITERM/EPPPD as dialer/packet driver
or LSPPP which is both a dialer and packet driver all-in-one.
In addition..... this version also includes quite a few changes 'stolen'
from Joe, Ray, Werner & Udo which will also be in Joe's next release.
Also included is a new 'help file' written by Christof Lange. (connword.htm)
This release is being made available strictly as a 'fill-in'
while we wait for Joe to release his new v1.90;J3
SRC code for Core.exe asrc193.zip
=====================================================================
Mail:Re: installing arachne for dsl Arachne v1.93
file:C:\ARACHNE\MAIL\A8875EC9.CNM Wed, 23 Jul 2008 12:40:05
_____________________________________________________________________
From: Glenn McCorkle
To: arachne@XXXXXXXXXXXXX
Date: Wed, 23 Jul 2008 12:28:15 -0500
Mailer: Arachne v1.93;UE12,r10
Subject: Re: installing arachne for dsl
=====================================================================
On Wed, 23 Jul 2008 05:10:06 -0700 (PDT), pcdos2k wrote:
> what is the procedure now for making arachne work on lan?
> i was able to make it work before (1.89) using 3com 3c509 isa card.
> now i have two 3c905 pci cards.
> i can load the packet driver but arachne can not detect it.
> i have a router on my dsl
Here's what works for me on LAN
_____________________________________________________________________
DSL_modem---->router---->5_port_switch--->computer_#1 (192.168.1.100)
192.168.0.1 192.168.1.1 |--->computer_#2 (192.168.1.101)
|--->computer_#3 (192.168.1.102)
|--->computer_#4 (192.168.1.103)
|--->computer_#5 (192.168.1.104)
_____________________________________________________________________
---- in arachne.cfg for use with router ---
[profile]
Profile ara-rtr.ACF
Connection READY
Hangup NULL
[dialer]
DialPage file:pppenhan.htm
Dialer NULL
[tcp/ip]
IP_Address 192.168.1.100 <-- IP assigned to this machine by router
NameServer 192.168.0.1 <-- IP of DSL modem
Gateway 192.168.1.1 <-- IP of router
Netmask 255.255.255.0 <-- or perhaps 255.0.0.0 or 0.0.0.0
TCPconfig PPPRTR.CFG <-- or a custom CFG that you have made
--- in ppprtr.cfg ---
my_ip = 192.168.1.100 <-- IP assigned to this machine by router
gateway = 192.168.1.1 <-- IP of router
netmask = 255.255.255.0 <-- or perhaps 255.0.0.0 or 0.0.0.0
# (if my_ip is anything other than 'bootp' or 'dhcp' then a netmask
# line is _required_ here in the wattcp CFG file even if you use all
# zeros.... without the netmask line, wattcp won't be able to contact
# the 'outside world' except via bootp/dhcp in which case
# the netmask is provided by the bootp/dhcp server)
_____________________________________________________________________
--
Glenn
http://www.delorie.com/listserv/mime/
http://www.delorie.com/djgpp/doc/msdog.html
http://www.glennmcc.org/
http://www.law.cornell.edu/constitution/constitution.table.html
=====================================================================
Arachne Insight 4.7;ML, GNUpyright (G)1997-2000 Arachne Labs
(now being maintained by the Arachne Development team)
=====================================================================
This page has been visited 4628 times.